Author Topic: color codes  (Read 734 times)

0 Members and 1 Guest are viewing this topic.

Offline si404

  • TM Collaborator
  • Hero Member
  • *****
  • Posts: 583
  • Last Login:Today at 03:05:47 am
Re: color codes
« Reply #45 on: August 22, 2017, 12:05:54 pm »
Exactly. I picked ISR as an Asian mapview example, as it contains asim system (red;3) and isrh (lightsalmon;4).
Personally I don't mind a colour clash between these two systems - asim doesn't recognise the state of Israel and vice versa, however (as with eure and usai) continental systems don't seem to have the signage requirement - and - with the exception of a brief bit of isrf, asim in ISR is entirely concurrent with isrh.

It's similar with asiah in regions where there are tier 4 systems - pretty much unsigned in those regions, and almost entirely concurrent with the tier 4 systems.

Also asiah and asim are only really red as a default.

But, certainly, making unclinched routes of those colours more distinct is a good thing as it increases flexibility with the palette should we decide on a change.
« Last Edit: August 22, 2017, 12:12:13 pm by si404 »

Offline Jim

  • TM Collaborator
  • Hero Member
  • *****
  • Posts: 864
  • Last Login:Yesterday at 11:40:56 pm
Re: color codes
« Reply #46 on: August 24, 2017, 08:57:55 pm »
I'm going to make the color scheme I previously had on tmtest and seemingly partially had on tm the default.  I heard no objections, at least.

Offline yakra

  • TM Collaborator
  • Hero Member
  • *****
  • Posts: 971
  • Last Login:Today at 12:40:53 am
Re: color codes
« Reply #47 on: August 25, 2017, 02:54:05 am »
To clarify, it was also only partially implemented on tmtest.

colorCodes[3] = { name: "yellow", unclinched: "rgb(255,255,100)", clinched: "rgb(232,176,0)" };
->
colorCodes[3] = { name: "yellow", unclinched: "rgb(255,216,100)", clinched: "rgb(232,176,0)" };

Sounds good to me though. I think all-in-all, it's an improvement on the previous defaults.
We can still take some time to tweak the untraveled red vs. traveled lightsalmon contrast.

Offline Jim

  • TM Collaborator
  • Hero Member
  • *****
  • Posts: 864
  • Last Login:Yesterday at 11:40:56 pm
Re: color codes
« Reply #48 on: August 25, 2017, 08:23:23 am »
To clarify, it was also only partially implemented on tmtest.

colorCodes[3] = { name: "yellow", unclinched: "rgb(255,255,100)", clinched: "rgb(232,176,0)" };
->
colorCodes[3] = { name: "yellow", unclinched: "rgb(255,216,100)", clinched: "rgb(232,176,0)" };

Sounds good to me though. I think all-in-all, it's an improvement on the previous defaults.
We can still take some time to tweak the untraveled red vs. traveled lightsalmon contrast.

Fixed on the main site, thanks.

Offline yakra

  • TM Collaborator
  • Hero Member
  • *****
  • Posts: 971
  • Last Login:Today at 12:40:53 am
Re: color codes
« Reply #49 on: August 25, 2017, 12:25:01 pm »
tmtest is still using (255,255,100) :)

Offline Jim

  • TM Collaborator
  • Hero Member
  • *****
  • Posts: 864
  • Last Login:Yesterday at 11:40:56 pm
Re: color codes
« Reply #50 on: August 25, 2017, 12:44:31 pm »
tmtest is still using (255,255,100) :)

Updated tmtest also now.

Offline afarina

  • Newbie
  • *
  • Posts: 4
  • Last Login:October 19, 2017, 09:14:22 pm
Re: color codes
« Reply #51 on: October 11, 2017, 12:10:27 pm »
My apologies for resurrecting an idle thread, but I've only been hanging out on GitHub and not here yet. I see the talk of customizing the colors and the ability to put it directly into the web address. It makes me wonder: is there a way to embed these into a user's list file? I suppose I could see the setup to where a user customizes how their map appears with their own set of colors. It wouldn't allow for a usage across the board, perhaps, but it might be a nice step in that direction.

Cheers,
A

Offline Jim

  • TM Collaborator
  • Hero Member
  • *****
  • Posts: 864
  • Last Login:Yesterday at 11:40:56 pm
Re: color codes
« Reply #52 on: October 11, 2017, 07:59:11 pm »
My apologies for resurrecting an idle thread, but I've only been hanging out on GitHub and not here yet. I see the talk of customizing the colors and the ability to put it directly into the web address. It makes me wonder: is there a way to embed these into a user's list file? I suppose I could see the setup to where a user customizes how their map appears with their own set of colors. It wouldn't allow for a usage across the board, perhaps, but it might be a nice step in that direction.

Cheers,
A

https://github.com/TravelMapping/DataProcessing/issues/65